CD6410M - Microcon Stepper Drive
High performance stepper module with RS232 indexer and bipolar microstepping drive.
The CD6410M is suitable for stepper motors with the holding torque from 3 Nm to 22 Nm.
Driver Specifications
- Supply voltage - 24 to 75 V
- Motor current amplitude / phase - 7 A peak
- Torque speed characteristics of the CD6410M module with stepper motors are identical to the CD6410M board characteristics
User Inputs
- All user inputs are opto-isolated for a high noise immunity.
- Input optocouplers with bipolar input photo diode allows
common anode or common cathode connection. It is possible to
connect both sink and source outputs.
- The standard input level is 24 V (5 V is optional).
User Outputs
- Open collecton outputs (up to 30 V)
- Low level output current - 100 mA
- 24 V source drivers (switchable to 5 V output level) are optional - please add A1 appendix to the module name.
- High level output current - 40 mA
Input and Output Connectors
- RS232 serial port input - CANNON 9 Pin/M
- RS232 serial port output - CANNON 9 Pin/M
- User inputs/outputs - removable screw terminal - 24 way
- Stepper Motor - removable screw terminal - 5 way
- Power supply - removable screw terminal - 3 way
Dimensions
- 127x110x80 mm (with cover and heat sink)
Accessories
- Cover, heat sink, connector kit, user manual
